DRILLCO

Taper Pin Reamers are manufactured with a taper of 1/4” per foot. They are used to ream holes into which standard taper pins will fit. The point of...

Taper Pin Reamers are manufactured with a taper of 1/4” per foot. They are used to ream holes into which standard taper pins will fit. The point of...

Taper Pin Reamers are manufactured with a taper of 1/4” per foot. They are used to ream holes into which standard taper pins will fit. The point of...

Thread forming taps “form” the thread rather than cut it, which allows the thread to be created without producing any chips. Thread forming taps ca...

Thread forming taps “form” the thread rather than cut it, which allows the thread to be created without producing any chips. Thread forming taps ca...

Hexagon Threading Dies are multi-edged, internally threaded tools used for cutting external threads. Hexagon dies are the same size as standard Hex...

Nitro Straight Flute “Hand Taps” are the most popular and versatile style of taps in general machine tapping operations. They are for general use i...

These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. T...

Screw Thread Insert (STI) taps are dimensionally oversize and utilize a larger tap drill size so that thread they produce will accommodate a helica...

Screw Thread Insert (STI) taps are dimensionally oversize and utilize a larger tap drill size so that thread they produce will accommodate a helica...

These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. T...

The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws o...

The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws o...

The long shank is ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.Made from...

The long shank is ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.Made from...

Carbon Steel Taps are used to rethread damaged or jammed threads, or to thread mild steels. They can be used for either through or blind holes.Tape...

Hexagon Rethreading Dies are precision high carbon steel dies. Rethreading Dies are extra thick to permit user to rethread damaged or jammed thread...

Carbon Steel Taps are used to rethread damaged or jammed threads, or to thread mild steels. They can be used for either through or blind holes.Tape...

Carbon Steel Taps are used to rethread damaged or jammed threads, or to thread mild steels. They can be used for either through or blind holes.Tape...

Drill and Tap in a single pass, reducing cycle time, and therefore reducing the manufacturing cost of a part. The drill part of the tool produces a...

Straight Flute “Hand Taps” are the most popular and versatile style of taps in general machine tapping operations. They are for general use in prod...

Straight Flute “Hand Taps” are the most popular and versatile style of taps in general machine tapping operations. They are for general use in prod...