DRILLCO

The two-flute center-cutting end mill can be used for multiple operations including plunge cutting and slotting, drilling and profiling. This can m...

The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth ...

For general purpose end milling in all types of materials, where the location of the operation requires the additional overall and flute lengths of...

Thread forming taps “form” the thread rather than cut it, which allows the thread to be created without producing any chips. Thread forming taps ca...

Thread forming taps “form” the thread rather than cut it, which allows the thread to be created without producing any chips. Thread forming taps ca...

Oversize taps are similar in design to a standard tap, but with a pitch diameter that is usually 0.0050” to 0.0055” larger than standard. Oversize ...

Oversize taps are similar in design to a standard taps, but with a pitch diameter that is usually 0.0050” to 0.0055” larger than standard. Oversize...

Designed for precision tapping of the modern difficult to machine materials. Fast spiral flutes provide new efficiency in chip removal. These taps ...

Designed for precision tapping of the modern difficult to machine materials. Fast spiral flutes provide new efficiency in chip removal. These taps ...

Hexagon Threading Dies are multi-edged, internally threaded tools used for cutting external threads. Hexagon dies are the same size as standard Hex...

These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. T...

Screw Thread Insert (STI) taps are dimensionally oversize and utilize a larger tap drill size so that thread they produce will accommodate a helica...

Screw Thread Insert (STI) taps are dimensionally oversize and utilize a larger tap drill size so that thread they produce will accommodate a helica...

These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. T...

The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws o...

The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws o...

Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with ...

The round split adjustable die may be adjusted through the screws on the holder.  Adjustment on the open type is done by turning the three screws o...

The long shank is ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.Made from...

The long shank is ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.Made from...

The long shank is ideal for reaching holes inaccessible with standard length taps. The thread length is the same length as a standard tap.Made from...

Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with ...

Pulley taps are used for tapping the hubs of pulleys for oil caps or set screws. The long shank is also ideal for reaching holes inaccessible with ...

Carbon Steel Taps are used to rethread damaged or jammed threads, or to thread mild steels. They can be used for either through or blind holes.Tape...