Ck Worldwide TIG Tungstens (Pack of 10) - T187GZ - 1/8" (White)
Ck Worldwide TIG Tungstens (Pack of 10) - T187GZ - 1/8" (White)
Priced Individually
2% THORIATED (RED) EWTh-2/WT20
Principal Oxide: 1.7–2.2% Thorium Oxide
Best for use in Direct Current (D/C) applications using transformer-based constant current power sources. Best for use on non-corroding steels, titanium alloys, nickel alloys, and copper alloys. Good D/C arc starts and stability, medium erosion rate, medium amperage range, medium tendency to spit.0.8% ZIRCONIATED
- T1167GT2 - Tungsten 1/16" 2% Thoriated
- T3327GT2 - Tungsten 3/32" 2% Thoriated
- T187GT2 - Tungsten 1/8" 2% Thoriated
- T5327GT2 - Tungsten 5/32" 2% Thoriated
(WHITE) EWZr-8/WZ8
Principal Oxide: 0.7–0.9% Zirconium Oxide
Best for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys using inverter or transformer-based constant current power sources. Balls well handle higher amperage than pure tungsten with less pitting, better arc starts, and arc stability than pure tungsten.
- T1167GZ - Tungsten 1/16" .8% Zirconiated
- T3327GZ - Tungsten 3/32" .8% Zirconiated
- T187GZ - Tungsten 1/8" .8% Zirconiated
1.5% LANTHANATED (GOLD) EWLa-1.5/WL15
Principal Oxide: 1.3–1.7% Lanthanum Oxide
Best for use in Direct Current (D/C) as an alternative to 2% Thoriated using inverter or transformer-based constant current power sources. Best for non-corroding steels, titanium alloys, nickel alloys, and copper alloys. Best D/C arc starts and stability, low erosion rate, wide amperage range, and no spitting.
- T1167GL - Tungsten 1/16"1.5% Lanthanated
- T3327GL - Tungsten 3/32"1.5% Lanthanated
- T187GL - Tungsten 1/8" 1.5% Lanthanated
2% CERIATED (GRAY) FORMERLY ORANGE EWCe-2/WC20
Principal Oxide: 1.8–2.2% Cerium Oxide
Best for use in Alternating Current (A/C) or Direct Current (D/C) applications using inverter or transformer-based constant current power sources. Good for low-alloyed steels, non-corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, and copper alloys. Good ignition and re-ignition properties, long service life, and excellent arc stability. Low erosion rate, best at low amperage range, no spitting, good D/C arc starts, and stability.
- T1167GC2 - Tungsten 1/16" 2% Ceriated
- T3327GC2 - Tungsten 3/32" 2% Ceriated
- T187GC2 - Tungsten 1/8" 2% Ceriated
PURE (GREEN) EWP/WP
Principal Oxide: None
Good for use in Alternating Current (A/C) for aluminum alloys and magnesium alloys in low to medium amperage applications using transformer-based constant current power sources only. Balls easily tend to spit at higher amperages. Used for non-critical welds only.
- T1167G - Tungsten 1/16" Pure
- T3327G - Tungsten 3/32" Pure
- T187G - Tungsten 1/8" Pure
2% LANTHANATED (BLUE) EWLa-2/WL20
Principal Oxide: 1.8–2.2% Lanthanum Oxide
Best general-purpose electrode for both Alternating Current (A/C) or Direct Current (D/C) using inverter or transformer-based constant current power sources. Good for low-alloyed steels, non-corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, and copper alloys. Good arc starts and stability, medium to high amperage range, low erosion rate.
- T1167GL2 - TUNGSTEN 1/16" 2% LANTHANATED
- T3327GL2 - TUNGSTEN 3/32" 2% LANTHANATED
- T187GL2 - TUNGSTEN 1/8" 2% LANTHANATED
LaYZr™ (CHARTREUSE) EWG
Principal Oxides: 1.5% Lanthanum, 0.8% Yttrium Oxides, 0.8% Zirconium
Best for automated or robotic applications in Alternating Current (A/C) or Direct Current (D/C) due to low voltage tolerance (changes in tip-to-work piece distance) using inverter or transformer-based constant current power sources. Good for low-alloyed steels, non-corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, and copper alloys. Very stable tip geometry runs cooler than 2% Thoriated with longer life, low to medium amperage range. Very best low amperage starts
- T1167GTM - TUNGSTEN 1/16" LaYZr
- T3327GTM - TUNGSTEN 3/32" LaYZr
- T187GTM - TUNGSTEN 1/8" LaYZr
- T5327GTM - TUNGSTEN 5/32 LaYZr