BÖHLER DIAMONDSPARK GUARD 420 MC - E70C-6M H4 - AWS A5.18/SFA 5.18 - 0.045" (1.2MM) GMAW WIRE SPOOL [16KG]

Bohler Diamondspark Guard 420 MC - E70C-6M H4 AWS A5.18/ASME SFA-5.18 - 0.045"(1.2mm)  MIG Wire (16KG Spool)

PRICED PER KG

All-positional metal-cored wire for steel up to 420 MPa yield for M20-M21 shielding gases, for structural steel constructions

Product Features

» Low Mn Fume emission

» Low FER diamondspark MCW

» Designed chemistry

» Stable arc

» Excellent feedability

» Seamless design

Product benefits

» Lower Mn emission in welding fume

» Reduction of hazardous particles at source

» Low silicon island formation

» No Nickel added

User benefits

» Provide highest level of protection in combination with existing safety tools

» Compliance with the most stringent safety rule in term of Mn emission

» Easy silicate removal

» High impact properties down to -46°C (≥ 27J)

» Welder-friendly

» Smooth wetting

» Low spatter

» Dependable feedability

» Low contact tip wear

» Copper-coated seamless cored wire

» Low-hydrogen weld metal

» Little to no helix

User Benefits

» Low defect rate

» Good fatigue resistance

» Less post weld cleaning

» No starting defects

» Increased arc time

» Excellent current transfer

» Resistance to moisture absorption

» Low risk of HAC

» Very straigh, high targeting accuracy

Diamondspark GUARD 420 MC is able to reduce operator exposure from airborne Mn and will assist in meeting recently revised exposure limits. This product offers reduced Mn fume produced at the arc due to its lower manganese levels in its chemistry. diamondspark GUARD 420 MC is the latest technology in seamless metal cored wires developed by Bohler Welding and due to its innovative chemistry, produces less than 60% of manganese in the welding fumes (mg/s) when compared to traditional metal cored wires whilst producing lower fumes than conventional flux cored wires. diamondspark GUARD 420 MC design criteria helps to maintain the same level of welding productivity and welding performance of conventional diamondspark metal-cored wires with a substantial reduction of Mn present in the welding fume. Features include: high resistance to porosity, good weld puddle fluidity as well as a low hydrogen content (< 2 ml/100 g deposit) in the weld deposit. This product is ideal for high productivity horizontal and flat position welding.Please note, revised exposure limits may also require the use of auxiliary fume capture devices combined with the use of a welding respirator to be fully compliant.